Flag Printing

Flag Printing

Basically, Flag printing is made on satin, polyester or polyester-mixed cloth

Flag printing clothes come in the roll form, it is printed up to in height 8 fit and length any size, mostly used for the flag and textile industry, Flag size and length and width ratio, is different for a specific country.  Printing quality digitally printed, Colour registration of the flag can be printed as well as specified in CYMK, RGB and Pantone, These colour printing accuracies vary from media to media (+-)2-3%

Fabric Used In Flag

Clothe used in flag printing satin, polyester and polyester-cotton mixed, during curving, ink curved properly on these materials.

Printing and Stitching Method

For small size, flag printing sublimation method is used. Bigger size flag is made on large printing roll form directly attached computer from printing to curving. to printing Usually, flags are printed in the single side in a pair and stitched both to get it ready to use.

Is the flag can be printed on both sides?

The flag fabric is generally printed on a single side to make both sides printed required 2 pcs stitched  to keep back to back.

 

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

Click here

Security Key Card

Key Card

Key Card, RF Id Card (Radio Frequency Identification Cards), Smart Card, Access Card, Chip Card, Privilege Card, Door Lock etc.

Types of Key Card

  1. Plain Key Card
  2. 1K Key Card
  3. 2K Key Card
  4. 3K Key Card

Mostly these cards are used in the hotel, corporates, club and hospitality industry. It is printed directly on to the card with inkjet or ribbon, No additional printing processing cost. It’s fully digital printing process, just make design and get start printing.

Mainly used is hospitality services as well as Staff Id, Student Id Card, Acess Card in which data is embedded, printing of key card is done through digital data card printer either single or both side printer.

Usually, the plastic Id card is made by heating and fusing method that may be a damage data card chip

The theses data card is printed through colourful and black & white ribbon with a thermal laminator, print quality produces very long lasting.

Advantage of Key Card

  1. Don’t require drill the door and setup new door lock in cause of loss of key
  2. Easy to handle even if purse can keep it
  3. Safety of electricity absence of guest switch on light
  4. Easy to check-in, in cause of evade guest from front desk

 

The capacity of printing key card

We have the capacity of printing every day 1000 card

For free sampling, key card click here 

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

Click here

 

 

 

Career in Designing, Printing and Publishing Industries

Career In Designing

Now we are leaving in the Digital World. There is a huge demand for the professional designer in the various sector even in Ad Agency, Corporate and Interior Designing Sector, Real State, Fashion Design and Textile Industry etc.

Now a day each corporate hire a designing team as well as product layout and developing. Whereas small industries and startup entrepreneurs get it done outsourcing.

Top 11 Design Skill Hiring /Job Posting Website

You can see there is large no. of a vacancy designer

  1. https://www.dribbble.com
  2. https://99designs.com
  3. https://www.naukary.com
  4. https://www.shine.com
  5. https://www.indeed.com
  6. https://www.quikr.com
  7. https://www.workindia.in

Only Delhi and NCR there are millions of graphic designer job.

Types of Designing

1.  Graphic Design

2. Interior Design

3. Web Designing

4. Medical Illustrator

5. Autocad Designer

6. Fashion Designer

Graphic Design

Product Layout, Printing, Packaging etc.

There are so many posts

  1. Layout Designer
  2. Graphic Designer
  3. Art Director
  4. Illustration Work

Creating vector for laser engraving, print & cut, face cut out, brochure design

Career In Freelance

Huge scope for a professional designer are earning income in 6 digits, even no required office

Skills To be a greet Designer

Most Popular Designing Software

  1. Corel Draw
  2. PhotoShop
  3. Illustrator
  4. InDesign
  5. Auto Cad
  6. Maya

There are freelance job providing a portal where you can get earn according to your skill as per hour or per project

What is the pay scale in the designing sector?

There are no basic parameter because designing is a developing part it has unlimited value depend on the quality what you deserve

Element Required for Designing

How to make it visual think required only paper, Pencil, Rubber

What Attitude Should be a Graphic Designer?

  1. Attitude must be positive even if a conceptual design what can be done else
  2. Passionate about work
  3. Imaginary
  4. Creative attitude

Logo Design Website

  1. https://secure.logomaker.com/step2/page/7

https://en.wikipedia.org/wiki/Designer

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

Click here

Face Cutout

Face Cutout

Face Cut Out
Face Cut Out

Face cutout advertising is the best in college, political campaign, to protest, social awareness etc. Its is the best way to make prominent advertisement issue.

With the help of thread holding on the face and stand out through hard stick, it is high durable advertisement media that can support long time campaign.

 

What stuff used in the face out?

Basically, it is made of paper having thickness 350 gsm, due to wear on the face for a long time, it may problem for high thickness. sometimes it happens they marched holding it above the head, done on another media as well as on sun board and sun pack help to keep straight in the air. Thickness generally to be kept 2-3 mm thick with holding the stick.

Face Cut Out with Stick
Face Cut Out with Stick

Printing Source

1.) Low Volume and Sunboard Face Cut Out

Printing can be done text or infographics, it is feasible on son board and sun pack material along with printability, it has lightweight that help to hold it long time up. Basically, both materials are 2-3 mm thicker that can be print through screen printing and digital UV printing method.

2.) High Volume Face Cut Out

For high volume face cut out, it is printed through offset printing method required minimum qty. as well as 2k-3k in A4 size and is cut through laser die standard cost comes around 5-6 Rs depending on post press work and paper quality.

Face Cutout Direct Laser and Wooden Laser Die

Typically, Direct Laser Cut goes high per unit cost and wooden laser die is cheaper but it depends on the work volume, For low volume direct laser is the best option and huge quantity wooden laser die is recommended. point view of safety to carry one destination to other destination it can be laminated.

Direct Laser Cutting no required basic cost, whereas wooden laser die required basic cost making wooden die first and cutting cost, so low volume is costly through the wooden laser to die cut process.

 

 

The material used in face cutout?

Paper Card Board, Sunboard, Sunpack, Paper

Turnaround

Direct Laser Cut or Wooden Die Cut takes not more than 2-3 days long from making vector artwork to the cutting process

https://en.wikipedia.org/wiki/Papercutting

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

Click here

 

3D Sublimation Printing Munirka, NCR Delhi India

3D Sublimation Printing

Basically 3D sublimation printing concept is based on vacuum + sublimation + heat transfer process, it is used for flatbed, cylindrical, Oval, curved just like a plate, mobile cover, mobile, stones, marbles, etc.

How Does 3D Sublimation Printing Machine Works?

  1.  In this process, first of all, printing artwork is printed on sublimation paper and then wrapped on the printing object with the help of thermal tape.

2. Object to be printed is placed inside the sublimation printing machine

3. Inside printing machine air is vacuumed properly

4. The machine is heated till the colour curved temperature 300-350 degree and maintain the same temperature 9-10 minute.

5. After curving ink heater is made switched off and wait till cool, you will find your customized object is ready with 3D Sublimation Printing

The advantage of 3D Printing Machine

Sublimation printing is done through 3D printing mobile cover, plate and cup, ceramic any type of curved etc.

There is no required any attachment

Is there is any chance to damage the mobile while printing on the mobile cover?

Don’t make a fear only external plastic cover is kept inside 3D printing machine on plastic adoptable temperature only. after printing it is fixed on mobile.

Let’s See how it works.

 

 

 

 

 

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

Click here

Mobile Back Cover Printing Munirka Delhi NCR India

Mobile Back Cover Printing

Get print your own photo mobile back cover and gift to your good well wisher Friend, Mother and Father Etc.

Passion Having Mobile Back Cover Printing

When it comes to photo print on your mobile back cover, some people think thinks that it may damage your device, but be sure that there is no any impact, Printing method that applied is known as UV Print and Vacum Sublimation printing process also known as 3D printing. Both processes are different from each other but result come awesome on mobile back cover printing.

Now there are very advanced printing technologies you can get print in 3D sublimation printing method. It can be applied on any angle printing as well as-required brand mobile color.

Longevity of Mobile Back Cover Printing

Don’t be fear, your mobile cover always remains as you wish to see it till it’s life. Basically, the mobile cover is made of polycarbonate sheet that is very hard, not breakable and sublimation printing is permanent fixing.

UV printing is a curving ink it’s a very amazing print process, no any smell 100% Eco-friendly and permanent long long lasting ink.

There are the various brand you can get a photo printed mobile covers

Mobile Back Cover Printing
Mobile Back Cover Printing

 

 

 

 

RED ME, LAVA, APPLE, HONOR SAMSUNG, LG, MI, MOTO, VIVO, OPPO, SONY, PANASONIC like more than 250 models

Gift Items printers in Munirka Delhi NCR India.

Material Required for Mobile Back Cover Printing

  1. Sublimation Paper
  2. 3D Sublimation Printing Machine
  3. Thermal Tape
  4. Inkjet Printer with Sublimation Ink
  5. Seaser
  6. Mobile Cover Die
  7. Mobile Cover

These are the basic elements required for it. Getting after a reverse print, it is paster on to mobile cover (made of polycarbonate) with taped thermal tape tighty

 

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

https://en.wikipedia.org/wiki/Mobile_phone_accessories

Click here

Digital Offset Printing Envelope in Munirka

Digital Offset Printing Envelope

Digital offset envelope printing means full-colour printing. Mostly digital printing application is applied on the ready-made envelope, even though envelopes are 10″x4.5″, 10″x12″ bigger than this size can’t be a print-digital process.

Custom size envelope is made after getting printed on flat paper and shaped with the customized die.

Content can be optimized vertical or landscape on any size envelope with info-graphics. Usually, ready-made envelope paper is made of in colours are available in white, yellow and brown in the open market.

How to get printed an envelope? just click here.

How to Design to get the Best Envelope Printing in Digital Offset Printing Method

 

Regular used sizes envelope are 10″x4.5″, 10″x12″ and 10″x 14″. Use images 250-300 dpi on the actual size you want to get the best printing result and avoid pixelate it. For bigger size envelope printing is done through offset printing.

as DOT more than 175 print easily through digital printing go for traditional lithography printing.

Digital Offset Envelope Printing
Digital Offset Envelope Printing

How to select the best quality paper for digital offset envelope printing?

Go get the rich density of color always select smoother paper, avoid deep texture and high paper as the ink does not adhere to the base etc. Highly coated Paper 120 gsm-170 gsm is the best for digital offset printing envelope.

https://en.wikipedia.org/wiki/Envelope

Required a Die for Custom Size Envelope printing and making

To make an envelope for irregular size have to make die each time to give shape and cost goes a little bit higher, and you can get the size you exactly required.

Die Making is a very important role in getting a very accurate shape and size and help to glued perfectly envelope

 

First of all, content is printed on the on sheet feed offset in the big sheet and after finish it applying wooden die to take shape and glued perfectly.

Full-colour printed envelope enhances your brand identity, presence in the market and reinforces your marketing message strategy.

For Free Digital Envelope Printing Sample click here 

follow us on :

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

https://www.youtube.com/channel/UC8DfOK4F377fQLRG5PPzhxg

Click here

 

Silk Printing Envelope Munirka Delhi India.

Silk Printing Envelope

Silk Printing envelope is usually used in small, medium and big size company. For posting of a business proposal letter, quotation, cheques, invoice and any such small types of document etc. It is imprinted with the company name, address, brand, email and web address etc.

10″x12″ and 10″x4.5″ envelope is very fast consuming envelopes. It usually used in each and every business documentation.

Silk Printing Envelope
Silk Printing Envelope

 

Some irregular size is 10″x14″, 12″x18” and 16″x20″ etc. less used because of the basic cost of silk printing come very economically.

Avoid digital Offset Printing Envelope when required low volume envelope

Usually, these envelopes are ready-made in various colour (white, off-white, textured un-coated and coated), in a packet of 250 each.

Silk Printing Envelope in 3 color
Silk Printing Envelope in 3 color

Special envelope in custom paper and size you required to expend more money to make the die and basic making charges extra.

How to Choose the Best Quality Silk Printing Envelope?

Whenever you are customizing envelope it should be remembered that the paper must not be thicker than 170 gsm. During Creasing, envelopes edge being cracked, and not less than 100 gsm creasing became uneffective envelopes not come accurate size etc.

How to Prepare the Best Artwork to Silk Printing Envelope?

In the silk printing, Only opaque colour can be printed at a time, so it needs to keep in font size between 7-10 points, avoid cursive and very thin, however, size of headings like the name of the company and other title words can be put in 12pt or above.

It would be better not to keep front size exceed prescribed size otherwise it became hauling type and cost goes over as in screen printing cost depends on the basis of colour, size area to be print and quantity etc..

What is the basic factor that depends on screen printing cost click here

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

 

Click here

Business Card Digital Offset Printing in Munirka NCR Delhi India.

Business Card Digital Offset Printing

Basically, business card digital offset printing is done in limited quantity with an individual name with variable data, Now a day people mostly preferred the digital printing process to get it print very fast with info-graphic content.

When it comes to digital printing mean direct print info-graphics on to the business card materials. It is the best for low quantity, economical rate and high-quality printing.

It is very difficult to say either offset or digital printing is the best. Overall it depends on the project that you have to execute, even point view of time, quality, quantity, price, printability etc.

Where from i get print my business card?

Just click here to get free sample card. It doesn’t take more than an hour in working time on standard paper quality, if required a specific paper, feel and touch may get more time than usually.

Business Card Digital Printing
Business Card Digital Printing

How to Select the Best Paper for Business Card Digital and Offset Printing?

Very fast way to print because it takes no time and set up the cost. As well as screen and offset printing process.

Paper thickness 250 gsm to 300 gsm, textured, plain with the best quality easily can be print for the business card best digital printing, use of more than 300 gsm may it causes to show the paper jam in printing machine etc. Avoid high grained paper to get the best result thicker paper may result come low ink density that produces inferior quality.

To get print fastest business card printing click here

Post Press Work on a Digital printing Card

You can apply thermal gloss and matte lamination on digital printing to protect and make stronger to avoid bend business card.

Embossing and leaf printing can be done on digital printing business card to make very attractive and highlight your brand but remember blind embossing is the best on digital printing business card.

Why We Must Go for Digital Printing Business Card

  1. Instant Print Solution
  2. Variable data printing on each print
  3. Low volume business card printing
  4. No time proofing and additional cost in digital card printing

Why We Must Go for Offset Printing

  1. To get the lowest cost on high volume business card
  2. Pinpoint printing
  3. Best result on post printed work on a business card as well embossing, hot stamping etc.
  4. To maximize colour printing accuracy
  5. More Print size and Paper stuff acceptance.

https://en.wikipedia.org/wiki/Business_card

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

https://www.youtube.com/channel/UC8DfOK4F377fQLRG5PPzhxg

 

Click here

Business Card Silk Printing in Munirka Delhi NCR India

Business Card Silk Printing

Printing for a business card silk printing technique is used for short run. Special raised Opaque Color printing and Embossing, De-Embossing work can be done with highly precised, because the basic cost is very low. Any business card stuff such as a paper card, wooden, craft, synthetic etc.

Textured or plain both can be printed easily and economically. Price is subject to quantity, area to be printed and no.of color printing. Only one color is printed at a time, to add more color required more time and new screen.

To get a raised and Opaque Color Printing follows a silk printing method but there is a limitation to be raised printing point view of the area. If required a large and high embossed use embossed letter printing.

 

Silk Printing Business Card with Embossing
Silk Printing Business Card with Embossing

How to prepare the best artwork for silk printing business card?

To get the best result in silk printing business card use text 300 DPI or vector file, even though text should be more enough to print texture or grained paper. Keep text of the address, tel, email, web etc. use 6 or more point size and avoid cursive it became it looks sharp and legible to read it.

Use Fine Mesh to get print silk print business card

Fine Mesh for silk print business card stands for more fabric use in per square inch when ink passes through a fine mesh it gives a fine result. 140 no. Polyester fabric is the best for silk printing.

Business Card Silk Printing and post-printing works

After getting a printed card, can give the shape you required as a round corner, rectangle or any die shape you wish. using laser die to get the sharp edges. People loved to see leaf printing business card printed.

https://en.wikipedia.org/wiki/Screen_printing

https://www.linkedin.com/in/suresh-kumar-b2348555/

https://in.pinterest.com/sureshshivanien/

https://www.instagram.com/sureshshivanienterprises/

https://www.facebook.com/shivanienterprises/

https://twitter.com/Shivani_Enterpr

https://plus.google.com/+SureshKumarShivanient

Click here