Flex Board MS Pipe Fabricator
While we are making a billboard required Flex Board MS Pipe fabrication to mount flex banner on it. A metal pipe to stand out properly with hard pipe and where flex is pasted on it.
Affordability of flex weight holding depends on the thickness when it is placing outdoor. For outdoor billboard there get the pressure of air to have when the wind blows fast, chances get increased to fell down the board.
As a hoarding is facing rain, wind and maintenance so it should be stronger as usually we need it
Tips to stand out flex board ms pipe even in windy air
- Use higher gauge pipe
- Get a hole in flex pasted on Ms Pipe it made easy to pass air
- Get external support from the base and cemented it.
- Do electrical welding in place on gas welding.
The capacity of holding flex weight, size and air pressure depend on MS Pipe Strongness used as well as 5 kg, 8 kg or 13 kg weight, the calculation is considered the standard length of 20 fit length contains weight.
The thickness stands for MS Pipe is based on weight in kg for 20 ft in lenght. Overall Billboard is used in outdoor have to keep in mind affordable to hold the pressure of wind below. For small size banner as like 4’x6′ required not more than 3/4″ to 1″Dia. You can make paint on it if you required the colour you wish.
Generally, the small banner stand comes in ready to use 24×7 hrs with a handy kit
How to get a ready-made backdrop stand click here
How to select MS pipe for flex banner printing?
While making a structure of a board we use a folding frame that makes convenient for logistics. joint of both pipe with male and female section
Huge signage required a flex with the mess to pass air through the mess to reduce the air pressure to stand out proper even it is the storm. Low gauge ms pipe can be weld with gas more thickness MS pipe required electric welding.
Usually, flex banner comes in roll form with a thickness of 220 gsm t0 350 gsm. to determine how many kg weight your flex banner is to fix on ms pipe fabrication simple following formula is
L x W x GSM/3100/500=KG, where L stands for length in inch and W for Width, GSM is the thickness of flex
Easy to measure MS pipe strength
To fix up about MS Pipe Fabrication query click here